You experience a starter motor noise on your Toyota Auris 2 every time you start your vehicle. We agree that this is not pleasant and that you have questions. Listening such a noise is not always a good signal, but it may also be nothing severe. To help you remedy this problem, our team has decided to prepare this content to help you in this research. First, we will describe how the starter motor functions on your Toyota Auris 2, and then what starter motor noises you can encounter on your Toyota Auris 2.
Functioning and various information
Function of a starter motor on Toyota Auris 2
The starter motor is an electric motor whose single role is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Toyota Auris 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Toyota Auris 2
- Do not try to start your engine for too long
- Do not use a starter motor on Toyota Auris 2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your car, the energy it is capable of holding may not be enough to generate the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the cause of your failure to start repeatedly, your starter may be the future part you will have to replace.
I experience noises from the starter motor of my Toyota Auris 2, what are the reasons?
I encounter a loud noise from the starter of my Toyota Auris 2
If you listen a starter motor noise on Toyota Auris 2 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is responsible of the starter motor noise on your Toyota Auris 2 swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this content about front end noise on Toyota Auris 2 which may offer you other leads to eliminate your noise problem.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Toyota Auris 2
If you experience a clicking noise at the starter motor of your Toyota Auris 2, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a problem with unplugged cable verify your electrical installation. If after checking out this clicking noise on Toyota Auris 2 doesn’t come from your starter motor, check this article for more informations.
