You acknowledge a starter motor noise on your Renault Clio 2 every time you start your car. We agree that this is not enjoyable and that you have questions. Listening such a noise is not always a good sign, but it may also be nothing severe. To support you solve this trouble, our team has chosen to compose this article to help you in this research. First, we will explain how the starter motor functions on your Renault Clio 2, and then what starter motor noises you can notice on your Renault Clio 2.
Functioning and various information
Function of a starter motor on Renault Clio 2
The starter motor is an electric motor whose single function is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Renault Clio 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Renault Clio 2
- Do not run your starter too long
- Do not use a starter motor on Renault Clio 2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be good enough to generate the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not solve the reason of your failure to start repeatedly, your starter may be the future component you will have to replace.
I acknowledge noises from the starter motor of my Renault Clio 2, what are the causes?
I encounter a loud noise from the starter of my Renault Clio 2
If you perceive a starter motor noise on Renault Clio 2 and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which case the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Renault Clio 2 swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, browse this article about front end noise on Renault Clio 2 which may give you other leads to fix your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Renault Clio 2
If you acknowledge a clicking noise at the starter motor of your Renault Clio 2, there are two possible failures relating to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a trouble with unplugged cable verify your electrical installation. If after checking this clicking noise on Renault Clio 2 doesn’t come from your starter motor, check this article for more informations.
