You perceive a starter motor noise on your Ram ProMaster once you start your automobile. We can understand that this is not pleasant and that you have inquiries. Hearing such a sound is not always a good sign, but it may also be nothing serious. To help you remedy this trouble, our team has chosen to create this article to help you in this research. First, we will explain how the starter motor works on your Ram ProMaster, and then what starter motor noises you can discover on your Ram ProMaster.
Functioning and various information
Function of a starter motor on Ram ProMaster
The starter motor is an electric motor whose only job is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ram ProMaster is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Ram ProMaster
- Do not run your starter too long
- Do not use a starter motor on Ram ProMaster with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be good enough to give the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not resolve the origin of your failure to start repeatedly, your starter may be the future component you will have to change.
I perceive noises from the starter motor of my Ram ProMaster, what are the triggers?
I encounter a loud noise from the starter of my Ram ProMaster
If you hear a starter motor noise on Ram ProMaster and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which situation the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Ram ProMaster swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this article about front end noise on Ram ProMaster which may offer you other leads to eliminate your noise trouble.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Ram ProMaster
If you perceive a clicking noise at the starter motor of your Ram ProMaster, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a trouble with unplugged cable verify your electrical installation. If after examining this clicking noise on Ram ProMaster doesn’t come from your starter motor, check this article for more informations.
