You listen to a starter motor noise on your Peugeot Boxer 2 each time you start your vehicle. We agree that this is not agreeable and that you have inquiries. Finding out such a sound is not always a good sign, but it may also be nothing major. To support you fix this problem, our team has chosen to create this content to support you in this research. First, we will detail how the starter motor functions on your Peugeot Boxer 2, and then what starter motor noises you can discover on your Peugeot Boxer 2.
Functioning and various information
Function of a starter motor on Peugeot Boxer 2
The starter motor is an electric motor whose single function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot Boxer 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Peugeot Boxer 2
- Do not run your starter too long
- Do not use a starter motor on Peugeot Boxer 2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be good enough to provide the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future element you will have to replace.
I listen to noises from the starter motor of my Peugeot Boxer 2, what are the causes?
I encounter a loud noise from the starter of my Peugeot Boxer 2
If you listen to a starter motor noise on Peugeot Boxer 2 and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which case the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is responsible of the starter motor noise on your Peugeot Boxer 2 swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this content about front end noise on Peugeot Boxer 2 which may give you other leads to remedy your noise problem.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot Boxer 2
If you listen to a clicking noise at the starter motor of your Peugeot Boxer 2, there are two possible failures associated with this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable examine your electrical installation. If after examining this clicking noise on Peugeot Boxer 2 doesn’t come from your starter motor, check this article for more informations.
