You perceive a starter motor noise on your Peugeot 1007 when you start your automobile. We agree that this is not pleasant and that you have questions. Discovering such a noise is not always a good indication, but it may also be nothing severe. To assist you solve this problem, our team has decided to prepare this article to assist you in this research. First, we will describe how the starter motor functions on your Peugeot 1007, and then what starter motor noises you can notice on your Peugeot 1007.
Functioning and various information
Function of a starter motor on Peugeot 1007
The starter motor is an electric motor whose single job is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 1007 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Peugeot 1007
- Do not run your starter too long
- Do not use a starter motor on Peugeot 1007 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your automobile, the energy it is capable of holding may not be enough to provide the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not deal with the cause of your failure to start repeatedly, your starter may be the future element you will have to swap.
I perceive noises from the starter motor of my Peugeot 1007, what are the reasons?
I encounter a loud noise from the starter of my Peugeot 1007
If you notice a starter motor noise on Peugeot 1007 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the component resposible of the starter motor noise on your Peugeot 1007 swap it.
If it is a noise in the front of your automobile but it seems to you after checking not to come from your starter, browse this article about front end noise on Peugeot 1007 which may offer you other leads to fix your noise problem.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 1007
If you perceive a clicking noise at the starter motor of your Peugeot 1007, there are two possible failures connected to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a problem with unplugged cable verify your electrical installation. If after checking this clicking noise on Peugeot 1007 doesn’t come from your starter motor, check this article for more informations.
