You acknowledge a starter motor noise on your Nissan Qashqai 2 every time you start your vehicle. We agree that this is not enjoyable and that you have questions. Hearing such a noise is not always a good sign, but it may also be nothing severe. To support you fix this problem, our team has decided to create this content to help you in this research. First, we will describe how the starter motor functions on your Nissan Qashqai 2, and then what starter motor noises you can notice on your Nissan Qashqai 2.
Functioning and various information
Function of a starter motor on Nissan Qashqai 2
The starter motor is an electric motor whose only function is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Nissan Qashqai 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Nissan Qashqai 2
- Do not run your starter too long
- Do not use a starter motor on Nissan Qashqai 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be sufficient to give the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the trigger of your failure to start repeatedly, your starter may be the future component you will have to replace.
I acknowledge noises from the starter motor of my Nissan Qashqai 2, what are the origins?
I feel a loud noise from the starter of my Nissan Qashqai 2
If you acknowledge a starter motor noise on Nissan Qashqai 2 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Nissan Qashqai 2 replace it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, consult this content about front end noise on Nissan Qashqai 2 which may offer you other leads to remedy your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Nissan Qashqai 2
If you acknowledge a clicking noise at the starter motor of your Nissan Qashqai 2, there are two possible failures linked to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a problem with unplugged cable verify your electrical installation. If after checking this clicking noise on Nissan Qashqai 2 doesn’t come from your starter motor, check this article for more informations.
