You listen to a starter motor noise on your Mazda MX 5 Miata each time you start your vehicle. We can understand that this is not enjoyable and that you have questions. Hearing such a noise is not always a good indication, but it may also be nothing significant. To assist you resolve this problem, our team has decided to write this article content to help you in this research. First, we will detail how the starter motor functions on your Mazda MX 5 Miata, and then what starter motor noises you can encounter on your Mazda MX 5 Miata.
Functioning and various information
Function of a starter motor on Mazda MX 5 Miata
The starter motor is an electric motor whose single job is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mazda MX 5 Miata is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Mazda MX 5 Miata
- Do not run your starter too long
- Do not use a starter motor on Mazda MX 5 Miata with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be good enough to provide the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not resolve the cause of your failure to start repeatedly, your starter may be the future part you will have to swap.
I listen to noises from the starter motor of my Mazda MX 5 Miata, what are the origins?
I encounter a loud noise from the starter of my Mazda MX 5 Miata
If you hear a starter motor noise on Mazda MX 5 Miata and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is responsible of the starter motor noise on your Mazda MX 5 Miata replace it.
If it is a noise in the front of your vehicle but it seems to you after checking not to come from your starter, consult this article content about front end noise on Mazda MX 5 Miata which may offer you other leads to solve your noise problem.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Mazda MX 5 Miata
If you listen to a clicking noise at the starter motor of your Mazda MX 5 Miata, there are two possible failures associated with this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable verify your electrical installation. If after checking out this clicking noise on Mazda MX 5 Miata doesn’t come from your starter motor, check this article for more informations.
