You listen a starter motor noise on your Kia Niro when you start your car. We can understand that this is not agreeable and that you have questions. Discovering such a sound is not always a good sign, but it may also be nothing severe. To help you solve this problem, our team has decided to produce this article to help you in this research. First, we will describe how the starter motor works on your Kia Niro, and then what starter motor noises you can know on your Kia Niro.
Functioning and various information
Function of a starter motor on Kia Niro
The starter motor is an electric motor whose sole task is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Kia Niro is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Kia Niro
- Do not run your starter too long
- Do not use a starter motor on Kia Niro with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your automobile, the energy it is capable of holding may not be enough to furnish the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future component you will have to change.
I listen noises from the starter motor of my Kia Niro, what are the origins?
I feel a loud noise from the starter of my Kia Niro
If you hear a starter motor noise on Kia Niro and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be perfect, in which case the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is responsible of the starter motor noise on your Kia Niro change it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, browse this article about front end noise on Kia Niro which may give you other leads to remedy your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Kia Niro
If you listen a clicking noise at the starter motor of your Kia Niro, there are two possible failures relating to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable check your electrical installation. If after tracking this clicking noise on Kia Niro doesn’t come from your starter motor, check this article for more informations.
