You listen a starter motor noise on your Hyundai Santa Fe when you start your vehicle. We agree that this is not agreeable and that you have questions. Finding out such a noise is not always a good sign, but it may also be nothing serious. To assist you resolve this trouble, our team has chosen to prepare this content to help you in this research. First, we will detail how the starter motor functions on your Hyundai Santa Fe, and then what starter motor noises you can discover on your Hyundai Santa Fe.
Functioning and various information
Function of a starter motor on Hyundai Santa Fe
The starter motor is an electric motor whose sole task is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Hyundai Santa Fe is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Hyundai Santa Fe
- Do not run your starter too long
- Do not use a starter motor on Hyundai Santa Fe with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be enough to furnish the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the reason of your failure to start repeatedly, your starter may be the future part you will have to swap.
I listen noises from the starter motor of my Hyundai Santa Fe, what are the triggers?
I experience a loud noise from the starter of my Hyundai Santa Fe
If you acknowledge a starter motor noise on Hyundai Santa Fe and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is responsible of the starter motor noise on your Hyundai Santa Fe swap it.
If it is a noise in the front of your vehicle but it seems to you after checking not to come from your starter, read this content about front end noise on Hyundai Santa Fe which may offer you other leads to remedy your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Hyundai Santa Fe
If you listen a clicking noise at the starter motor of your Hyundai Santa Fe, there are two possible failures associated with this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a trouble with unplugged cable verify your electrical installation. If after tracking this clicking noise on Hyundai Santa Fe doesn’t come from your starter motor, check this article for more informations.
