You hear a starter motor noise on your Hyundai Elantra each time you start your automobile. We agree that this is not agreeable and that you have inquiries. Hearing such a noise is not always a good indication, but it may also be nothing major. To help you fix this problem, our team has chosen to write this article content to help you in this research. First, we will detail how the starter motor works on your Hyundai Elantra, and then what starter motor noises you can encounter on your Hyundai Elantra.
Functioning and various information
Function of a starter motor on Hyundai Elantra
The starter motor is an electric motor whose only role is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Hyundai Elantra is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Hyundai Elantra
- Do not run your starter too long
- Do not use a starter motor on Hyundai Elantra with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to give the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not resolve the cause of your failure to start repeatedly, your starter may be the future part you will have to swap.
I hear noises from the starter motor of my Hyundai Elantra, what are the triggers?
I experience a loud noise from the starter of my Hyundai Elantra
If you listen a starter motor noise on Hyundai Elantra and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the part responsible of the starter motor noise on your Hyundai Elantra swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this article content about front end noise on Hyundai Elantra which may give you other leads to resolve your noise problem.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Hyundai Elantra
If you hear a clicking noise at the starter motor of your Hyundai Elantra, there are two possible failures connected to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a problem with unplugged cable check your electrical installation. If after tracking this clicking noise on Hyundai Elantra doesn’t come from your starter motor, check this article for more informations.
