You listen a starter motor noise on your Ford Flex every time you start your vehicle. We agree that this is not pleasant and that you have questions. Discovering such a sound is not always a good indication, but it may also be nothing serious. To assist you resolve this trouble, our team has chosen to prepare this content page to support you in this research. First, we will describe how the starter motor functions on your Ford Flex, and then what starter motor noises you can notice on your Ford Flex.
Functioning and various information
Function of a starter motor on Ford Flex
The starter motor is an electric motor whose single function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford Flex is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Ford Flex
- Do not run your starter too long
- Do not use a starter motor on Ford Flex with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be enough to furnish the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the origin of your failure to start repeatedly, your starter may be the future component you will have to replace.
I listen noises from the starter motor of my Ford Flex, what are the reasons?
I feel a loud noise from the starter of my Ford Flex
If you listen to a starter motor noise on Ford Flex and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the component resposible of the starter motor noise on your Ford Flex change it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, browse this content page about front end noise on Ford Flex which may provide you other leads to remedy your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford Flex
If you listen a clicking noise at the starter motor of your Ford Flex, there are two possible failures relating to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a trouble with unplugged cable check your electrical installation. If after looking at this clicking noise on Ford Flex doesn’t come from your starter motor, check this article for more informations.
