You hear a starter motor noise on your Acura TL when you start your vehicle. We can understand that this is not pleasant and that you have questions. Discovering such a noise is not always a good signal, but it may also be nothing severe. To support you solve this issue, our team has decided to create this article content to help you in this research. First, we will detail how the starter motor works on your Acura TL, and then what starter motor noises you can experience on your Acura TL.starter-motor-noise-acura-tl

Functioning and various information

Function of a starter motor on Acura TL

The starter motor is an electric motor whose only role is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Acura TL is activated and turns the drive pinion on the flywheel to start the engine.

How to prevent starter motor noises on Acura TL

  • Do not try to start your engine for too long
  • Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it. In fact, the current required to make it turn and the speed of rotation only permits it to perform its function over very short and intense periods of time. If the automobile does not start, look for the solution somewhere else.

  • Do not use a starter motor on Acura TL with a tired battery
  • Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be good enough to generate the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not resolve the trigger of your failure to start repeatedly, your starter may be the future element you will have to swap.

I hear noises from the starter motor of my Acura TL, what are the reasons?

I feel a loud noise from the starter of my Acura TL

If you listen a starter motor noise on Acura TL and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down as time passes and will not slip and will no longer properly activate the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Acura TL swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, check this article content about front end noise on Acura TL which may offer you other leads to resolve your noise issue.

I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Acura TL

If you hear a clicking noise at the starter motor of your Acura TL, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a issue with unplugged cable examine your electrical installation. If after looking at this clicking noise on Acura TL doesn’t come from your starter motor, check this article for more informations.