You experience a starter motor noise on your Fiat Panda each time you start your vehicle. We agree that this is not agreeable and that you have inquiries. Experiencing such a noise is not always a good signal, but it may also be nothing severe. To support you solve this issue, our team has chosen to prepare this article to support you in this research. First, we will detail how the starter motor functions on your Fiat Panda, and then what starter motor noises you can discover on your Fiat Panda.
Functioning and various information
Function of a starter motor on Fiat Panda
The starter motor is an electric motor whose only task is to start the engine of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat Panda is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Fiat Panda
- Do not run your starter too long
- Do not use a starter motor on Fiat Panda with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be enough to furnish the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not resolve the cause of your failure to start repeatedly, your starter may be the future part you will have to change.
I experience noises from the starter motor of my Fiat Panda, what are the causes?
I experience a loud noise from the starter of my Fiat Panda
If you experience a starter motor noise on Fiat Panda and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Fiat Panda swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, consult this article about front end noise on Fiat Panda which may provide you other leads to remedy your noise issue.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat Panda
If you experience a clicking noise at the starter motor of your Fiat Panda, there are two possible failures connected to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable verify your electrical installation. If after checking this clicking noise on Fiat Panda doesn’t come from your starter motor, check this article for more informations.
