You notice a starter motor noise on your Fiat Doblo 2 once you start your vehicle. We agree that this is not enjoyable and that you have inquiries. Finding out such a sound is not always a good signal, but it may also be nothing severe. To assist you fix this problem, our team has decided to write this content page to help you in this research. First, we will detail how the starter motor functions on your Fiat Doblo 2, and then what starter motor noises you can notice on your Fiat Doblo 2.
Functioning and various information
Function of a starter motor on Fiat Doblo 2
The starter motor is an electric motor whose only role is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat Doblo 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Fiat Doblo 2
- Do not try to start your engine for too long
- Do not use a starter motor on Fiat Doblo 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be good enough to provide the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not treat the cause of your failure to start repeatedly, your starter may be the future part you will have to swap.
I notice noises from the starter motor of my Fiat Doblo 2, what are the causes?
I encounter a loud noise from the starter of my Fiat Doblo 2
If you listen a starter motor noise on Fiat Doblo 2 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Fiat Doblo 2 change it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this content page about front end noise on Fiat Doblo 2 which may offer you other leads to resolve your noise problem.
I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat Doblo 2
If you notice a clicking noise at the starter motor of your Fiat Doblo 2, there are two possible failures related to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable check your electrical installation. If after checking out this clicking noise on Fiat Doblo 2 doesn’t come from your starter motor, check this article for more informations.
