You acknowledge a starter motor noise on your Fiat 500 X when you start your automobile. We can understand that this is not pleasant and that you have inquiries. Discovering such a sound is not always a good sign, but it may also be nothing major. To help you fix this issue, our team has chosen to prepare this content to assist you in this research. First, we will detail how the starter motor functions on your Fiat 500 X, and then what starter motor noises you can encounter on your Fiat 500 X.
Functioning and various information
Function of a starter motor on Fiat 500 X
The starter motor is an electric motor whose only task is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat 500 X is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Fiat 500 X
- Do not try to start your engine for too long
- Do not use a starter motor on Fiat 500 X with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to provide the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not solve the origin of your failure to start repeatedly, your starter may be the future element you will have to replace.
I acknowledge noises from the starter motor of my Fiat 500 X, what are the reasons?
I encounter a loud noise from the starter of my Fiat 500 X
If you perceive a starter motor noise on Fiat 500 X and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which circumstance the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is the element responsible of the starter motor noise on your Fiat 500 X change it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, browse this content about front end noise on Fiat 500 X which may provide you other leads to eliminate your noise issue.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat 500 X
If you acknowledge a clicking noise at the starter motor of your Fiat 500 X, there are two possible failures linked to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a issue with unplugged cable check your electrical installation. If after checking this clicking noise on Fiat 500 X doesn’t come from your starter motor, check this article for more informations.
