You acknowledge a starter motor noise on your Fiat 500 every time you start your car. We can understand that this is not pleasant and that you have inquiries. Hearing such a sound is not always a good indication, but it may also be nothing significant. To support you resolve this trouble, our team has decided to prepare this article content to support you in this research. First, we will describe how the starter motor works on your Fiat 500, and then what starter motor noises you can know on your Fiat 500.
Functioning and various information
Function of a starter motor on Fiat 500
The starter motor is an electric motor whose only function is to start the engine of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat 500 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Fiat 500
- Do not try to start your engine for too long
- Do not use a starter motor on Fiat 500 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your automobile, the energy it is capable of holding may not be enough to give the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not correct the trigger of your failure to start repeatedly, your starter may be the future part you will have to swap.
I acknowledge noises from the starter motor of my Fiat 500, what are the triggers?
I encounter a loud noise from the starter of my Fiat 500
If you experience a starter motor noise on Fiat 500 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Fiat 500 change it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, read this article content about front end noise on Fiat 500 which may give you other leads to solve your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat 500
If you acknowledge a clicking noise at the starter motor of your Fiat 500, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable verify your electrical installation. If after tracking this clicking noise on Fiat 500 doesn’t come from your starter motor, check this article for more informations.
