You perceive a starter motor noise on your CUPRA FORMENTOR once you start your vehicle. We can understand that this is not pleasant and that you have inquiries. Finding out such a sound is not always a good signal, but it may also be nothing serious. To help you solve this issue, our team has decided to prepare this content page to assist you in this research. First, we will explain how the starter motor works on your CUPRA FORMENTOR, and then what starter motor noises you can encounter on your CUPRA FORMENTOR.
Functioning and various information
Function of a starter motor on CUPRA FORMENTOR
The starter motor is an electric motor whose only job is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your CUPRA FORMENTOR is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on CUPRA FORMENTOR
- Do not try to start your engine for too long
- Do not use a starter motor on CUPRA FORMENTOR with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be enough to give the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not solve the reason of your failure to start repeatedly, your starter may be the future element you will have to swap.
I perceive noises from the starter motor of my CUPRA FORMENTOR, what are the causes?
I feel a loud noise from the starter of my CUPRA FORMENTOR
If you notice a starter motor noise on CUPRA FORMENTOR and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the part responsible of the starter motor noise on your CUPRA FORMENTOR replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, browse this content page about front end noise on CUPRA FORMENTOR which may provide you other leads to fix your noise issue.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my CUPRA FORMENTOR
If you perceive a clicking noise at the starter motor of your CUPRA FORMENTOR, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable verify your electrical installation. If after checking out this clicking noise on CUPRA FORMENTOR doesn’t come from your starter motor, check this article for more informations.
