You perceive a starter motor noise on your Chevrolet Malibu when you start your car. We can understand that this is not enjoyable and that you have inquiries. Discovering such a sound is not always a good sign, but it may also be nothing major. To assist you resolve this trouble, our team has decided to produce this content page to support you in this research. First, we will describe how the starter motor functions on your Chevrolet Malibu, and then what starter motor noises you can encounter on your Chevrolet Malibu.
Functioning and various information
Function of a starter motor on Chevrolet Malibu
The starter motor is an electric motor whose single job is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Malibu is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Chevrolet Malibu
- Do not run your starter too long
- Do not use a starter motor on Chevrolet Malibu with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to provide the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not deal with the reason of your failure to start repeatedly, your starter may be the future part you will have to swap.
I perceive noises from the starter motor of my Chevrolet Malibu, what are the causes?
I encounter a loud noise from the starter of my Chevrolet Malibu
If you hear a starter motor noise on Chevrolet Malibu and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is the part responsible of the starter motor noise on your Chevrolet Malibu replace it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, browse this content page about front end noise on Chevrolet Malibu which may provide you other leads to fix your noise trouble.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Malibu
If you perceive a clicking noise at the starter motor of your Chevrolet Malibu, there are two possible failures associated with this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a trouble with unplugged cable check your electrical installation. If after looking at this clicking noise on Chevrolet Malibu doesn’t come from your starter motor, check this article for more informations.
