You acknowledge a starter motor noise on your Chevrolet Cruze when you start your automobile. We can understand that this is not pleasant and that you have questions. Hearing such a noise is not always a good sign, but it may also be nothing significant. To help you fix this problem, our team has chosen to write this article to assist you in this research. First, we will detail how the starter motor works on your Chevrolet Cruze, and then what starter motor noises you can experience on your Chevrolet Cruze.
Functioning and various information
Function of a starter motor on Chevrolet Cruze
The starter motor is an electric motor whose sole task is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Cruze is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Chevrolet Cruze
- Do not run your starter too long
- Do not use a starter motor on Chevrolet Cruze with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be sufficient to provide the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not fix the cause of your failure to start repeatedly, your starter may be the future component you will have to replace.
I acknowledge noises from the starter motor of my Chevrolet Cruze, what are the causes?
I encounter a loud noise from the starter of my Chevrolet Cruze
If you listen to a starter motor noise on Chevrolet Cruze and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which case the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Chevrolet Cruze change it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, browse this article about front end noise on Chevrolet Cruze which may give you other leads to remedy your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Cruze
If you acknowledge a clicking noise at the starter motor of your Chevrolet Cruze, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable check your electrical installation. If after checking out this clicking noise on Chevrolet Cruze doesn’t come from your starter motor, check this article for more informations.
