It is never pleasing to discover a noise from your car you don’t know where from. Then what if you discover a serpentine belt noise that stays on your Peugeot 1007? It is very conceivable that this is a minor trouble, but before being sure, it is better to operate some checks. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you locating and fixing it. First, we will look at the serpentine belt noises on your Peugeot 1007 and then we will look at the sources of these noises.
I experience noises from serpentine belt Peugeot 1007
The best way to check the condition of your belts is to listen to your automobile. Immediately after you perceive noises such as squealing or bells, you should take a closer look to examine their origin. The function of the serpentine belt or driving belt of your Peugeot 1007 is to transmit the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine elements at variable speeds.
I discover squealing noises on my serpentine belt Peugeot 1007
This kind of squealing belt noises on Peugeot 1007, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be heavy and it is obviously quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to locate a belt noise on your Peugeot 1007. The cause of this trouble can be connected to the damper pulley, which acts as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Peugeot 1007 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Peugeot 1007
Just like squealing, a driving belt noise on your Peugeot 1007 that sounds like a loud grinding sound can tell you a lot about its condition. It is therefore necessary that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Make sure you examine first the serpentine/driving belt which in most cases is the cause of this trouble, otherwise it will be necessary to swap the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Peugeot 1007
Finally, if in your case you recognize a bearing belt noise on Peugeot 1007, it is conceivable that it is connected to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Peugeot 1007 which could maybe help you.
