It is never pleasant to discover a noise from your car you don’t know where from. Then what if you identify a serpentine belt noise that stays on your Nissan Almera? It is highly possible that this is a minor issue, but before being sure, it is better to conduct some checks. If this belt noise comes from your serpentine or driving belt, our team has written a document to help you locating and fixing it. First, we will look at the serpentine belt noises on your Nissan Almera and then we will look at the origins of these sounds.
I feel noises from serpentine belt Nissan Almera
The best way to control the state of your belts is to listen to your car. Immediately after you find sounds such as squealing or bells, you should take a closer look to check their origin. The job of the serpentine belt or driving belt of your Nissan Almera is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal operation of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine components at variable speeds.
I discover squealing noises on my serpentine belt Nissan Almera
This kind of squealing belt noises on Nissan Almera, which will often be acute, can generally arise when the engine is cold, or when the acceleration increases in intensity. . This kind of sound must be significant and it is obviously quite simple to link it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being visible, it should not be too complicated for you to point a belt noise on your Nissan Almera. The reason of this issue can be connected to the damper pulley, which works as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this phenomenon is annodine. As the serpentine belt of your Nissan Almera is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to check the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Nissan Almera
Just like squealing, a driving belt noise on your Nissan Almera that sounds like a loud grinding sound can reveal a lot about its state. It is therefore important that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Make sure to check first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to replace the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Nissan Almera
Finally, if in your case you recognize a bearing belt noise on Nissan Almera, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on Nissan Almera which could maybe help you.
