It is never enjoyable to notice a noise from your car you don’t know where from. Then what if you detect a serpentine belt noise that lasts on your Mercedes Classe E 4? It is highly plausible that this is a minor problem, but before being sure, it is better to execute some checks. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you finding and solving it. First, we will look at the serpentine belt noises on your Mercedes Classe E 4 and then we will check out the origins of these noises.
I experience noises from serpentine belt Mercedes Classe E 4
The best technique to check the condition of your belts is to listen to your automobile. Immediately after you notice noises such as squealing or bells, you should take a closer look to verify their origin. The role of the serpentine belt or driving belt of your Mercedes Classe E 4 is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I notice squealing noises on my serpentine belt Mercedes Classe E 4
This sort of squealing belt noises on Mercedes Classe E 4, which will often be acute, can mostly happen when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be heavy and it is often quite simple to relate it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to locate a belt noise on your Mercedes Classe E 4. The reason of this problem can be connected to the damper pulley, which functions as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this event is annodine. As the serpentine belt of your Mercedes Classe E 4 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Mercedes Classe E 4
Just like squealing, a driving belt noise on your Mercedes Classe E 4 that sounds like a loud grinding sound can express a lot about its condition. It is therefore essential that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Remember to verify first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to replace the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Mercedes Classe E 4
Finally, if in your case you distinguish a bearing belt noise on Mercedes Classe E 4, it is plausible that it is connected to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Mercedes Classe E 4 which could maybe help you.
