It is never enjoyable to find out a noise from your car you don’t know where from. Thus what if you discover a serpentine belt noise that lasts on your Mazda MX 5 Miata? It is very plausible that this is a minimal trouble, but before being sure, it is better to execute some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a page to help you locating and solving it. First, we will look at the serpentine belt noises on your Mazda MX 5 Miata and then we will look at the sources of these noises.
I experience noises from serpentine belt Mazda MX 5 Miata
The best technique to control the condition of your belts is to listen to your car. As soon as you perceive noises such as squealing or bells, you should take a closer look to examine their origin. The task of the serpentine belt or driving belt of your Mazda MX 5 Miata is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal performance of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine elements at variable speeds.
I find out squealing noises on my serpentine belt Mazda MX 5 Miata
This kind of squealing belt noises on Mazda MX 5 Miata, which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be significant and it is normally quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to locate a belt noise on your Mazda MX 5 Miata. The reason of this trouble can be related to the damper pulley, which operates as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Mazda MX 5 Miata is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Mazda MX 5 Miata
Just like squealing, a driving belt noise on your Mazda MX 5 Miata that sounds like a loud grinding sound can say a lot about its condition. It is therefore necessary that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Remember to examine first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to replace the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Mazda MX 5 Miata
Finally, if in your case you identify a bearing belt noise on Mazda MX 5 Miata, it is plausible that it is related to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still notice a belt noises, read our article about timing belt noises on Mazda MX 5 Miata which could maybe help you.
