It is never pleasant to find out a noise from your car you don’t know where from. So what if you detect a serpentine belt noise that lasts on your Infiniti Q60? It is very possible that this is a unimportant issue, but before being sure, it is better to operate some checks. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you finding and correcting it. First, we will look at the serpentine belt noises on your Infiniti Q60 and then we will check out the sources of these sounds.
I experience noises from serpentine belt Infiniti Q60
The best technique to control the condition of your belts is to listen to your automobile. As soon as you find sounds such as squealing or bells, you should take a closer look to examine their origin. The job of the serpentine belt or driving belt of your Infiniti Q60 is to transmit the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal overall performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine elements at variable speeds.
I find out squealing noises on my serpentine belt Infiniti Q60
This type of squealing belt noises on Infiniti Q60, which will often be acute, can usually happen when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be significant and it is often quite simple to link it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to identify a belt noise on your Infiniti Q60. The cause of this issue can be related to the damper pulley, which functions as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this event is annodine. As the serpentine belt of your Infiniti Q60 is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to examine the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Infiniti Q60
Just like squealing, a driving belt noise on your Infiniti Q60 that sounds like a loud grinding sound can express a lot about its condition. It is therefore imperative that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Make sure to examine first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to swap the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Infiniti Q60
Finally, if in your case you distinguish a bearing belt noise on Infiniti Q60, it is possible that it is related to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on Infiniti Q60 which could maybe help you.
