It is never relaxing to listen to a noise from your car you don’t know where from. So what if you discover a serpentine belt noise that lasts on your Honda HR V? It is extremely possible that this is a minimal issue, but before being sure, it is better to accomplish some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you locating and correcting it. First, we will look at the serpentine belt noises on your Honda HR V and then we will check out the origins of these sounds.serpentine-belt-noise-honda-hr-v

I experience noises from serpentine belt Honda HR V

The best strategy to control the state of your belts is to listen to your automobile. As soon as you recognize sounds such as squealing or bells, you should take a closer look to check their origin. The job of the serpentine belt or driving belt of your Honda HR V is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine parts at variable speeds.

I listen to squealing noises on my serpentine belt Honda HR V

This sort of squealing belt noises on Honda HR V, which will often be acute, can usually occur when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be significant and it is often quite simple to associate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to locate a belt noise on your Honda HR V. The cause of this issue can be connected to the damper pulley, which functions as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this event is annodine. As the serpentine belt of your Honda HR V is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to check the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.

I listen to loud serpentine or driving belt noises Honda HR V

Just like squealing, a driving belt noise on your Honda HR V that sounds like a loud grinding sound can say a lot about its state. It is therefore necessary that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Make sure you check first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to replace the tensioner or pulley.

I listen to bearing noises on the serpentine belt of my Honda HR V

Finally, if in your case you recognize a bearing belt noise on Honda HR V, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Honda HR V which could maybe help you.