It is never enjoyable to find out a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that persists on your Fiat Panda? It is very plausible that this is a minor trouble, but before being sure, it is better to accomplish some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a post to help you finding and correcting it. First, we will look at the serpentine belt noises on your Fiat Panda and then we will look at the origins of these sounds.
I feel noises from serpentine belt Fiat Panda
The best way to control the condition of your belts is to listen to your vehicle. As soon as you recognise sounds such as squealing or bells, you should take a closer look to verify their origin. The role of the serpentine belt or driving belt of your Fiat Panda is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal overall performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine components at variable speeds.
I find out squealing noises on my serpentine belt Fiat Panda
This type of squealing belt noises on Fiat Panda, which will often be acute, can mostly happen when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be heavy and it is normally quite simple to link it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too difficult for you to spot a belt noise on your Fiat Panda. The reason of this trouble can be linked to the damper pulley, which operates as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Fiat Panda is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Fiat Panda
Just like squealing, a driving belt noise on your Fiat Panda that sounds like a loud grinding sound can say a lot about its condition. It is therefore imperative that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Remember to verify first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to swap the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Fiat Panda
Finally, if in your case you identify a bearing belt noise on Fiat Panda, it is plausible that it is linked to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still detect a belt noises, read our article about timing belt noises on Fiat Panda which could maybe help you.
