It is never pleasant to find out a noise from your car you don’t know where from. Then what if you detect a serpentine belt noise that remains on your Chevrolet Colorado? It is highly possible that this is a unimportant problem, but before being sure, it is better to accomplish some verifications. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you locating and solving it. First, we will look at the serpentine belt noises on your Chevrolet Colorado and then we will look at the origins of these sounds.
I experience noises from serpentine belt Chevrolet Colorado
The best strategy to control the condition of your belts is to listen to your automobile. Immediately after you recognise sounds such as squealing or bells, you should take a closer look to examine their origin. The role of the serpentine belt or driving belt of your Chevrolet Colorado is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal operation of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine elements at variable speeds.
I find out squealing noises on my serpentine belt Chevrolet Colorado
This type of squealing belt noises on Chevrolet Colorado, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be significant and it is normally quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to point a belt noise on your Chevrolet Colorado. The cause of this problem can be linked to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your Chevrolet Colorado is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Chevrolet Colorado
Just like squealing, a driving belt noise on your Chevrolet Colorado that sounds like a loud grinding sound can say a lot about its condition. It is therefore essential that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Don’t forget to examine first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to change the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Chevrolet Colorado
Finally, if in your case you discern a bearing belt noise on Chevrolet Colorado, it is possible that it is linked to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still identify a belt noises, read our article about timing belt noises on Chevrolet Colorado which could maybe help you.
