It is never relaxing to find out a noise from your car you don’t know where from. Then what if you discover a serpentine belt noise that remains on your Chevrolet Bolt? It is highly possible that this is a minor trouble, but before being sure, it is better to conduct some investigations. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you locating and repairing it. First, we will look at the serpentine belt noises on your Chevrolet Bolt and then we will check out the origins of these sounds.
I feel noises from serpentine belt Chevrolet Bolt
The best technique to control the condition of your belts is to listen to your vehicle. Immediately after you notice sounds such as squealing or bells, you should take a closer look to check their source. The task of the serpentine belt or driving belt of your Chevrolet Bolt is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine components at variable speeds.
I find out squealing noises on my serpentine belt Chevrolet Bolt
This sort of squealing belt noises on Chevrolet Bolt, which will often be acute, can mostly arise when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be heavy and it is obviously quite simple to associate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being visible, it should not be too complicated for you to point a belt noise on your Chevrolet Bolt. The cause of this trouble can be in connection with the damper pulley, which functions as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this phenomenon is annodine. As the serpentine belt of your Chevrolet Bolt is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to check the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Chevrolet Bolt
Just like squealing, a driving belt noise on your Chevrolet Bolt that sounds like a loud grinding sound can express a lot about its condition. It is therefore important that you look further and locate the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Make sure you check first the serpentine/driving belt which in most cases is the cause of this trouble, otherwise it will be necessary to swap the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Chevrolet Bolt
Finally, if in your case you identify a bearing belt noise on Chevrolet Bolt, it is possible that it is in connection with a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still identify a belt noises, read our article about timing belt noises on Chevrolet Bolt which could maybe help you.
