Hearing noises from your car is never relaxing. Especially repeated noises such as rubbing noises on Mazda 6 that will disturb you and prevent you from cruising in the normal quiet environment that your car gives you. If you notice rubbing noise on Mazda 6, you are in the right place, our team has decided to create this content to help you find the source and stop it. This is why, first of all, we will focus on the rubbing noises that can occur when you drive with your Mazda 6, and secondly, the rubbing noises that come from your engine block.
I listen a rubbing noise on Mazda 6 when I drive
Noise of rubbing from wheels
First, we will look into rubbing noises that can be due to wheel, be aware that in this content we will only explore the most traditional triggers of rubbing noises on Mazda 6 in connection with your wheels, if you need a full report on wheel noise on Mazda 6, it’s here.
- Rubbing noise based on your bearing
- Brake noise
One of the other probable triggers of rubbing noise manifestations on your Mazda 6, may be that one of your bearing is tired, it will commonly make a loud noise that goes up when stressed (turns faster and faster). So think about to verify by taking speed (neutral gear and window open to give consideration only to noise of the wheels) that the noise is well located here, if this is the case replace it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on Ancre_loud_noise, you will most likely find a remedy to your issue.
If you experience a rubbing noise on Mazda 6 and you have the feeling that it comes from your wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the state of your discs and pads by taking out the wheel. If they are involved, replace them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want informations about it, go through this article for more info about brake noises on Mazda 6.
Noise of rubbing from under the car
Finally, a rubbing noise on your Mazda 6 from the lower part of the chassis may be connected to a poor attachment of your exhaust to your car. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In such a case, you must verify, when cold, that the exhaust holds well, to perform this try to make it move in different angles and watch how it responds. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In cases like this it will have to be swapped. If your exhaust is the cause of this exhaust noise on Mazda 6, but the silent blocks are not the reason, read this article to find the cause.
I listen a rubbing noise on Mazda 6 coming from the engine
If it approaches an engine noise rubbing on Mazda 6, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and cause this friction.So check the state and try to find the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to show up in rpm, accelerate and position someone at the engine block to identify the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also keep in mind to verify the state of your belts, and replace them if needed because it is the health of your car that is at stake. If you encounter belt noises on Mazda 6, we recommend that you browse this content for more info on this subject.
