It happens sometimes that your car makes noises in the brake calipers, you are rarely reassured by this kind of noise and you automatically tend to think that you will have an accident or that the repair will cost you an substantial amount. So, what if you detect noise from the brake calipers on your Mazda 6? It might not be some thing severe and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have made the decision to compose this document and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mazda 6, and give you the reasons for them in order to help you solve the issue.
The different types of brake caliper noise on Mazda 6 and their causes
The objective of the Mazda 6 brake calipers is to come pinch the brake discs of your Mazda 6 thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Finding out a sound from it must therefore be looked into right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Mazda 6
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Mazda 6, it is highly imaginable that it will be caused by brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will promptly ruin your discs and keep doing this scrap or grinding noise on Mazda 6. If after looking at this point, you’re still experiencing a grinding noise on your Mazda 6, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Mazda 6 brake calipers
If you are the victim of a regular noise in the brake calipers of your Mazda 6 that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam with time, especially if they are not employed enough. In such a case, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mazda 6
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Mazda 6, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Mazda 6
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mazda 6, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
