Hearing noises from your car is never satisfying. Especially persistent noises such as rubbing noises on Honda Accord that will disturb you and prevent you from driving in the normal quiet environment that your car provides you. If you discern rubbing noise on Honda Accord, you are in the right place, our team has decided to prepare this article content to help you locate the origin and stop it. This is why, first of all, we will focus on the rubbing noises that can show up when you drive with your Honda Accord, and secondly, the rubbing noises that come from your engine block.
I hear a rubbing noise on Honda Accord when I drive
Noise of rubbing from wheels
First, we will center on rubbing noises that can be caused by wheel, be aware that in this content page we will only analyze the most traditional triggers of rubbing noises on Honda Accord associated with your wheels, if you need a full guide on wheel noise on Honda Accord, it’s here.
- Rubbing noise caused by your bearing
- Brake noise
One of the other possible triggers of rubbing noise manifestations on your Honda Accord, may be that one of your bearing is tired, it will tend to make a loud noise that increase when stressed (turns faster and faster). So bear in mind to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well based here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this article on Ancre_loud_noise, you will most likely find a remedy to your trouble.
If you discern a rubbing noise on Honda Accord and you have the feeling that it comes from your wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the condition of your discs and pads by taking away the wheel. If they are involved, swap them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want informations about it, go through this guide for more info about brake noises on Honda Accord.
Noise of rubbing from under the car
Finally, a rubbing noise on your Honda Accord from the lower part of the chassis may be related to a poor attachment of your exhaust to your car. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In this case, you must check, when cold, that the exhaust holds well, to achieve this try to make it move in different angles and check out how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is possible that a rubber mounts may have died . In this instance it will have to be replaced. If your exhaust is the reason of this exhaust noise on Honda Accord, but the silent blocks are not the reason, consult this guide to find the reason.
I hear a rubbing noise on Honda Accord coming from the engine
If it approaches an engine noise rubbing on Honda Accord, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and trigger this friction.So verify the condition and try to find the exact source of this noise by positioning someone at the engine at idle, and if this noise is more likely to happen in rpm, accelerate and position someone at the engine block to determine the area of origins of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also bear in mind to check the condition of your belts, and swap them if needed because it is the health of your car that is at stake. If you experience belt noises on Honda Accord, we recommend that you consult this article content for more info on this subject.
