Being subject to frequent noise on your vehicle tends to be frustrating, a vehicle is so sophisticated that it is generally difficult to determine its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Honda Accord, we will most likely be able to help you. Indeed, our editorial staff decided to compose this document in order to review the main causes of a clicking noise on Honda Accord. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Honda Accord coming from your suspensions.clicking-noise-honda-accord

I perceive a clicking noise on Honda Accord on my engine

Verify your high engine

If you perceive a clicking noise on Honda Accord, and this noise is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two parts can be the causes of these ticking noises on Honda Accord. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, generally when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this situation, remember to change them.

Verify your low engine

If you have determined the spot of source of the Honda Accord clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both circumstances, the risk in the long term is the breakage of the motor. These two maintenance are very complicated and most mechanics will encourage you to replace the engine of your Honda Accord.

Combustion problem

Finally, if you have the feeling that this clicking noise on Honda Accord is linked to the combustion of your engine, there are three possible causes of it. Verify the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are destroyed. In this case, do not hesitate to check this document which deals in detail with the different injection sounds on Honda Accord.

I perceive a clicking noise on Honda Accord in my direction

Verify the state of the gimbals

One of the most regular triggers of a clicking noises in the direction of your Honda Accord is linked to the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be replaced very quickly, otherwise the entire cardan shaft will have to be replaced. Consider taking a look at it. If you would like more detailed information about gimbals noises on Honda Accord, do not hesitate to consult this complete guide.

Verify the rest of your direction

Finally, when you detect a clicking noise on your Honda Accord, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.

I perceive a clicking noise on Honda Accord coming from my suspensions

Verify the suspension

If you encounter a clicking noise on your Honda Accord each time you pass a speed bump, it is really conceivable that your suspension block is the induce of the noise. Indeed, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented road and, at low speed, focus on the noise originating from your front axle when you pass over holes. If these are the cups, consider changing them promptly as this may damage other parts and require more expensive repairs.

Check spring and cylinder

If you detect a clicking noise on your Honda Accord at the suspension level, it is highly conceivable that spring wear or shock cylinder deformation may be a explanation. To check the shape of the spring, place the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you observe a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Honda Accord than a clicking noise, don’t hesitate to consult this article.