Listening noises from your vehicle is never pleasant. Especially constant noises such as rubbing noises on GMC Yukon XL that will disturb you and prevent you from traveling in the usual quiet environment that your vehicle provides you. If you discern rubbing noise on GMC Yukon XL, you are in the right place, our team has decided to prepare this content page to help you find the source and stop it. This is why, first of all, we will look into the rubbing noises that can appear when you drive with your GMC Yukon XL, and secondly, the rubbing noises that come from your engine block.rubbing-noise-gmc-yukon-xl

I experience a rubbing noise on GMC Yukon XL when I drive

Noise of rubbing from wheels

First, we will look into rubbing noises that can be connected to wheel, be aware that in this content we will only analyze the most common causes of rubbing noises on GMC Yukon XL in association with your wheels, if you desire a full guide on wheel noise on GMC Yukon XL, it’s here.

  • Rubbing noise caused by your bearing
  • One of the other most likely causes of rubbing noise manifestations on your GMC Yukon XL, may be that one of your bearing is tired, it will commonly make a loud noise that increase when stressed (turns faster and faster). So bear in mind to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well based here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on Ancre_loud_noise, you will most likely find a solution to your problem.

  • Brake noise
  • If you hear a rubbing noise on GMC Yukon XL and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the condition of your discs and pads by taking away the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your vehicle, and you want informations about it, read this guide for more information about brake noises on GMC Yukon XL.

    Noise of rubbing from under the vehicle

    Finally, a rubbing noise on your GMC Yukon XL from the lower part of the chassis may be related to a poor attachment of your exhaust to your automobile. Indeed, over time, vibrations, the pot fasteners on the vehicle chassis can come off. In such a case, you must check, when cold, that the exhaust holds well, to perform this try to make it move in different ways and observe how it responds. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In this instance it will have to be swapped. If your exhaust is the cause of this exhaust noise on GMC Yukon XL, but the silent blocks are not the reason, read this guide to find the cause.

    I experience a rubbing noise on GMC Yukon XL coming from the engine

    If it is close to an engine noise rubbing on GMC Yukon XL, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and trigger this friction.So examine the condition and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to occur in rpm, accelerate and position someone at the engine block to determine the area of origin of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also keep in mind to check the condition of your belts, and swap them if required because it is the health of your vehicle that is at stake. If you experience belt noises on GMC Yukon XL, we recommend that you have a look at this content page for more details on this subject.