It is never enjoyable to discover a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that remains on your Volvo V50? Any gearbox issue can be severe, but before making sure, it is better to do a few investigations. Our team has made this document to help you deal with it. First, we will see what the sources and the different gearbox noises can be on Volvo V50, and second, what are the solutions available to you.
Classical reverse Volvo V50 noises and some tips to preserve your gearbox
Why does the reversing of my Volvo V50 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The noise created by the reversing of your Volvo V50 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be significant and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Volvo V50 if you shift gear under these conditions.
Several Volvo V50 reversing noises and their causes
Finally in this section, we will move on to what you are probably most curious about in this article, to learn about the source of reversing noise on Volvo V50. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Volvo V50, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this document for more details about strut mount noises on Volvo V50.
An increased reverse knocking noise on Volvo V50X
If you are subject to a knocking noise when you are in reverse with your Volvo V50 and this noise tends to increase as you gain speed. It is possible that you are dealing with a serious issue that needs to be fixed right away before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your automobile to your mechanic quickly or check out this document about gearbox noise on Volvo V50 for more information.
I discover a noise when I go in reverse
Listening a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volvo V50 reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
