It is never pleasurable to hear a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that continues on your Volkswagen Up!? Any gearbox trouble can be important, but before making sure, it is better to do a few inspections. Our team has made this article to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Volkswagen Up!, and second, what are the solutions available to you.
Classical reverse Volkswagen Up! noises and some tips to look after your gearbox
Why does the reversing of my Volkswagen Up! make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound created by the reversing of your Volkswagen Up! is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will exert on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Volkswagen Up! if you shift gear under these conditions.
Several Volkswagen Up! reversing noises and their origins
Finally in this section, we will move on to what you are probably most curious about in this article, to find out about the origin of reversing noise on Volkswagen Up!. Here are the 3 typical noises you may be victim of.
I notice a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Volkswagen Up!, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this content for more info about strut mount noises on Volkswagen Up!.
An increased reverse knocking noise on Volkswagen Up!X
If you are subject to a knocking noise when you are in reverse with your Volkswagen Up! and this noise tends to amplify as you gain speed. It is possible that you are confronting a serious trouble that needs to be resolved right away before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your automobile to your auto technician quickly or browse this content about gearbox noise on Volkswagen Up! for more details.
I find out a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Up! reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
