It is never pleasurable to discover a sound on your automobile that you don’t know where it comes from. You may be questioning what to do when you notice a reversing gear noise that lasts on your Volkswagen Touran 2? Any gearbox issue can be critical, but before making sure, it is better to do a few investigations. Our team has written this article to support you resolve it. First, we will see what the origins and the different gearbox noises can be on Volkswagen Touran 2, and second, what are the solutions available to you.
Classical reverse Volkswagen Touran 2 noises and some tips to preserve your gearbox
Why does the reversing of my Volkswagen Touran 2 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The sound created by the reversing of your Volkswagen Touran 2 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. Indeed, the pressure you will apply on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you hear a reverse noise on your Volkswagen Touran 2 if you shift gear under these conditions.
Different Volkswagen Touran 2 reversing noises and their causes
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the origin of reversing noise on Volkswagen Touran 2. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Volkswagen Touran 2, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this paper for more information about strut mount noises on Volkswagen Touran 2.
An increased reverse knocking noise on Volkswagen Touran 2X
If you are subject to a knocking noise when you are in reverse with your Volkswagen Touran 2 and this noise tends to amplify as you gain speed. It is plausible that you are dealing with a serious issue that needs to be resolved as soon as possible before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your automobile to your repair shop quickly or browse this article about gearbox noise on Volkswagen Touran 2 for more data.
I hear a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Touran 2 reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
