It is never enjoyable to find out a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that persists on your Volkswagen California? Any gearbox issue can be severe, but before making sure, it is better to do a few investigations. Our team has made this document to help you fix it. First, we will see what the origins and the different gearbox noises can be on Volkswagen California, and second, what are the solutions available to you.
Classical reverse Volkswagen California noises and some tips to maintain your gearbox
Why does the reversing of my Volkswagen California make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise induced by the reversing of your Volkswagen California is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will put in on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Volkswagen California if you shift gear under these conditions.
Different Volkswagen California reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the cause of reversing noise on Volkswagen California. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Volkswagen California, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this article for more information about strut mount noises on Volkswagen California.
An increased reverse knocking noise on Volkswagen CaliforniaX
If you are subject to a knocking noise when you are in reverse with your Volkswagen California and this noise tends to increase as you gain speed. It is conceivable that you are confronting a serious issue that needs to be resolved right away before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your auto technician quickly or browse this content about gearbox noise on Volkswagen California for more details.
I perceive a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen California reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.