It is never pleasurable to experience a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you detect a reversing gear noise that lasts on your skoda octavia? Any gearbox issue can be serious, but before making sure, it is better to do a few checks. Our team has created this paper to support you fix it. First, we will see what the origins and the different gearbox noises can be on skoda octavia, and second, what are the solutions available to you.
Classical reverse skoda octavia noises and some tips to protect your gearbox
Why does the reversing of my skoda octavia make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise made by the reversing of your skoda octavia is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will exert on the gears will be enormous and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you listen to a reverse noise on your skoda octavia if you shift gear under these conditions.
Diverse skoda octavia reversing noises and their causes
Finally in this section, we will move on to what you are probably most curious about in this article, to learn about the cause of reversing noise on skoda octavia. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your skoda octavia, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this content page for more info about strut mount noises on skoda octavia.
An increased reverse knocking noise on skoda octaviaX
If you are subject to a knocking noise when you are in reverse with your skoda octavia and this noise tends to increase as you gain speed. It is plausible that you are confronting a serious issue that needs to be solved very fast before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your vehicle to your auto technician quickly or check out this content page about gearbox noise on skoda octavia for more data.
I acknowledge a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your skoda octavia reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
