It is never pleasant to notice a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you detect a reversing gear noise that persists on your Skoda Enyaq? Any gearbox issue can be critical, but before making sure, it is better to do a few investigations. Our team has created this content page to support you resolve it. First, we will see what the origins and the different gearbox noises can be on Skoda Enyaq, and second, what are the solutions available to you.
Classical reverse Skoda Enyaq noises and some tips to protect your gearbox
Why does the reversing of my Skoda Enyaq make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The sound induced by the reversing of your Skoda Enyaq is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will apply on the gears will be significant and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you listen to a reverse noise on your Skoda Enyaq if you shift gear under these conditions.
Diverse Skoda Enyaq reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the source of reversing noise on Skoda Enyaq. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Skoda Enyaq, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this paper for more info about strut mount noises on Skoda Enyaq.
An increased reverse knocking noise on Skoda EnyaqX
If you are subject to a knocking noise when you are in reverse with your Skoda Enyaq and this noise tends to build up as you gain speed. It is possible that you are confronting a serious issue that needs to be resolved quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your vehicle to your auto mechanic quickly or check out this document about gearbox noise on Skoda Enyaq for more details.
I acknowledge a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Skoda Enyaq reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
