It is never pleasurable to acknowledge a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you identify a reversing gear noise that persists on your Seat Arona? Any gearbox problem can be important, but before making sure, it is better to do a few investigations. Our team has made this content page to help you solve it. First, we will see what the sources and the different gearbox noises can be on Seat Arona, and second, what are the solutions available to you.
Classical reverse Seat Arona noises and some tips to look after your gearbox
Why does the reversing of my Seat Arona make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound induced by the reversing of your Seat Arona is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be significant and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you notice a reverse noise on your Seat Arona if you shift gear under these conditions.
Diverse Seat Arona reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the source of reversing noise on Seat Arona. Here are the 3 typical sounds you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Seat Arona, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this content page for more info about strut mount noises on Seat Arona.
An increased reverse knocking noise on Seat AronaX
If you are subject to a knocking noise when you are in reverse with your Seat Arona and this noise tends to build up as you gain speed. It is conceivable that you are experiencing a serious problem that needs to be solved quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears before long. Take your car to your technician quickly or check out this document about gearbox noise on Seat Arona for more data.
I notice a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Seat Arona reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
