It is never enjoyable to experience a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that continues on your Renault Twingo 2? Any gearbox trouble can be important, but before making sure, it is better to do a few investigations. Our team has created this paper to help you fix it. First, we will see what the sources and the different gearbox noises can be on Renault Twingo 2, and second, what are the solutions available to you.
Classical reverse Renault Twingo 2 noises and some tips to preserve your gearbox
Why does the reversing of my Renault Twingo 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise caused by the reversing of your Renault Twingo 2 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will exert on the gears will be significant and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you find out a reverse noise on your Renault Twingo 2 if you shift gear under these conditions.
Diverse Renault Twingo 2 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most interested in this content, to find out about the cause of reversing noise on Renault Twingo 2. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Renault Twingo 2, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to consult this article for more details about strut mount noises on Renault Twingo 2.
An increased reverse knocking noise on Renault Twingo 2X
If you are subject to a knocking noise when you are in reverse with your Renault Twingo 2 and this noise tends to amplify as you gain speed. It is conceivable that you are going through a serious trouble that needs to be fixed fairly quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your automobile to your technician quickly or read this content about gearbox noise on Renault Twingo 2 for more information.
I hear a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Twingo 2 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
