It is never pleasurable to hear a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that lasts on your Renault Megane 2? Any gearbox problem can be critical, but before making sure, it is better to do a few inspections. Our team has written this document to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Renault Megane 2, and second, what are the solutions available to you.
Classical reverse Renault Megane 2 noises and some tips to preserve your gearbox
Why does the reversing of my Renault Megane 2 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The sound caused by the reversing of your Renault Megane 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will apply on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you experience a reverse noise on your Renault Megane 2 if you shift gear under these conditions.
Different Renault Megane 2 reversing noises and their causes
Finally in this section, we will move on to what you are probably most interested in this page, to learn about the source of reversing noise on Renault Megane 2. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Renault Megane 2, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this content page for more info about strut mount noises on Renault Megane 2.
An increased reverse knocking noise on Renault Megane 2X
If you are subject to a knocking noise when you are in reverse with your Renault Megane 2 and this noise tends to amplify as you gain speed. It is possible that you are experiencing a serious problem that needs to be resolved as soon as possible before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your automobile to your repair shop quickly or browse this content about gearbox noise on Renault Megane 2 for more details.
I notice a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Megane 2 reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
