It is never enjoyable to perceive a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that remains on your Renault Kangoo? Any gearbox problem can be serious, but before making sure, it is better to do a few inspections. Our team has written this content page to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Renault Kangoo, and second, what are the solutions available to you.
Classical reverse Renault Kangoo noises and some tips to look after your gearbox
Why does the reversing of my Renault Kangoo make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The noise caused by the reversing of your Renault Kangoo is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will apply on the gears will be monumental and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you experience a reverse noise on your Renault Kangoo if you shift gear under these conditions.
Different Renault Kangoo reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this content, to learn about the cause of reversing noise on Renault Kangoo. Here are the 3 typical sounds you may be victim of.
I experience a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Renault Kangoo, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this content for more info about strut mount noises on Renault Kangoo.
An increased reverse knocking noise on Renault KangooX
If you are subject to a knocking noise when you are in reverse with your Renault Kangoo and this noise tends to increase as you gain speed. It is plausible that you are dealing with a serious problem that needs to be fixed right away before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears before long. Take your automobile to your technician quickly or browse this document about gearbox noise on Renault Kangoo for more data.
I perceive a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Kangoo reverse gear makes more noise than before, it is plausible that filings have been made and are moving around in it. It is therefore time to empty the box.
