It is never enjoyable to experience a sound on your automobile that you don’t know where it comes from. You may be wondering what to do when you detect a reversing gear noise that persists on your Renault Clio 2? Any gearbox issue can be important, but before making sure, it is better to do a few checks. Our team has written this content page to help you eliminate it. First, we will see what the sources and the different gearbox noises can be on Renault Clio 2, and second, what are the solutions available to you.
Classical reverse Renault Clio 2 noises and some tips to preserve your gearbox
Why does the reversing of my Renault Clio 2 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound caused by the reversing of your Renault Clio 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will apply on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you hear a reverse noise on your Renault Clio 2 if you shift gear under these conditions.
Several Renault Clio 2 reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this document, to learn about the cause of reversing noise on Renault Clio 2. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Renault Clio 2, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check this content for more information about strut mount noises on Renault Clio 2.
An increased reverse knocking noise on Renault Clio 2X
If you are subject to a knocking noise when you are in reverse with your Renault Clio 2 and this noise tends to amplify as you gain speed. It is conceivable that you are experiencing a serious issue that needs to be solved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your automobile to your technician quickly or browse this content page about gearbox noise on Renault Clio 2 for more data.
I acknowledge a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Clio 2 reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
