It is never pleasurable to experience a sound on your car that you don’t know where it comes from. You may be wanting to know what to do when you notice a reversing gear noise that persists on your Peugeot e-2008? Any gearbox problem can be important, but before making sure, it is better to do a few investigations. Our team has made this content page to help you deal with it. First, we will see what the sources and the different gearbox noises can be on Peugeot e-2008, and second, what are the solutions available to you.
Classical reverse Peugeot e-2008 noises and some tips to look after your gearbox
Why does the reversing of my Peugeot e-2008 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The sound generated by the reversing of your Peugeot e-2008 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will put in on the gears will be significant and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you experience a reverse noise on your Peugeot e-2008 if you shift gear under these conditions.
Different Peugeot e-2008 reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this page, to learn about the cause of reversing noise on Peugeot e-2008. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Peugeot e-2008, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this paper for more details about strut mount noises on Peugeot e-2008.
An increased reverse knocking noise on Peugeot e-2008X
If you are subject to a knocking noise when you are in reverse with your Peugeot e-2008 and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious problem that needs to be resolved right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your car to your technician quickly or browse this document about gearbox noise on Peugeot e-2008 for more data.
I notice a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot e-2008 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
