It is never pleasing to acknowledge a sound on your automobile that you don’t know where it comes from. You may be questioning what to do when you find a reversing gear noise that continues on your Peugeot Boxer? Any gearbox issue can be critical, but before making sure, it is better to do a few inspections. Our team has made this content page to help you solve it. First, we will see what the origins and the different gearbox noises can be on Peugeot Boxer, and second, what are the solutions available to you.
Classical reverse Peugeot Boxer noises and some tips to look after your gearbox
Why does the reversing of my Peugeot Boxer make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The noise created by the reversing of your Peugeot Boxer is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will apply on the gears will be enormous and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Peugeot Boxer if you shift gear under these conditions.
Different Peugeot Boxer reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to learn about the origin of reversing noise on Peugeot Boxer. Here are the 3 typical noises you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Peugeot Boxer, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this article for more info about strut mount noises on Peugeot Boxer.
An increased reverse knocking noise on Peugeot BoxerX
If you are subject to a knocking noise when you are in reverse with your Peugeot Boxer and this noise tends to build up as you gain speed. It is conceivable that you are experiencing a serious issue that needs to be resolved rather quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your automobile to your repair shop quickly or check out this document about gearbox noise on Peugeot Boxer for more data.
I perceive a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot Boxer reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
