It is never pleasant to hear a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you identify a reversing gear noise that persists on your Peugeot 2008? Any gearbox problem can be critical, but before making sure, it is better to do a few investigations. Our team has written this paper to help you solve it. First, we will see what the sources and the different gearbox noises can be on Peugeot 2008, and second, what are the solutions available to you.
Classical reverse Peugeot 2008 noises and some tips to preserve your gearbox
Why does the reversing of my Peugeot 2008 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound created by the reversing of your Peugeot 2008 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will put in on the gears will be enormous and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you perceive a reverse noise on your Peugeot 2008 if you shift gear under these conditions.
Different Peugeot 2008 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this article, to learn about the cause of reversing noise on Peugeot 2008. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Peugeot 2008, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this content for more information about strut mount noises on Peugeot 2008.
An increased reverse knocking noise on Peugeot 2008X
If you are subject to a knocking noise when you are in reverse with your Peugeot 2008 and this noise tends to increase as you gain speed. It is conceivable that you are experiencing a serious problem that needs to be fixed fairly quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your automobile to your repair shop quickly or read this content about gearbox noise on Peugeot 2008 for more information.
I acknowledge a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot 2008 reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
