It is never enjoyable to find out a sound on your automobile that you don’t know where it comes from. You may be wondering what to do when you find a reversing gear noise that remains on your Mitsubishi Asx? Any gearbox trouble can be serious, but before making sure, it is better to do a few inspections. Our team has written this document to help you deal with it. First, we will see what the origins and the different gearbox noises can be on Mitsubishi Asx, and second, what are the solutions available to you.
Classical reverse Mitsubishi Asx noises and some tips to protect your gearbox
Why does the reversing of my Mitsubishi Asx make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise induced by the reversing of your Mitsubishi Asx is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will exert on the gears will be enormous and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you notice a reverse noise on your Mitsubishi Asx if you shift gear under these conditions.
Diverse Mitsubishi Asx reversing noises and their triggers
Finally in this section, we will move on to what you are probably most interested in this article, to find out about the cause of reversing noise on Mitsubishi Asx. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Mitsubishi Asx, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this article for more info about strut mount noises on Mitsubishi Asx.
An increased reverse knocking noise on Mitsubishi AsxX
If you are subject to a knocking noise when you are in reverse with your Mitsubishi Asx and this noise tends to build up as you gain speed. It is conceivable that you are dealing with a serious trouble that needs to be fixed as soon as possible before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears quickly. Take your automobile to your repair shop quickly or check out this document about gearbox noise on Mitsubishi Asx for more information.
I notice a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Mitsubishi Asx reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
