It is never enjoyable to experience a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that remains on your Hyundai Kona? Any gearbox problem can be serious, but before making sure, it is better to do a few inspections. Our team has made this paper to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Hyundai Kona, and second, what are the solutions available to you.
Classical reverse Hyundai Kona noises and some tips to preserve your gearbox
Why does the reversing of my Hyundai Kona make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The noise created by the reversing of your Hyundai Kona is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will put in on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Hyundai Kona if you shift gear under these conditions.
Different Hyundai Kona reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the source of reversing noise on Hyundai Kona. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Hyundai Kona, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this article for more information about strut mount noises on Hyundai Kona.
An increased reverse knocking noise on Hyundai KonaX
If you are subject to a knocking noise when you are in reverse with your Hyundai Kona and this noise tends to increase as you gain speed. It is conceivable that you are confronting a serious problem that needs to be fixed fairly quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your vehicle to your mechanic quickly or check out this content page about gearbox noise on Hyundai Kona for more information.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Kona reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
