It is never pleasing to acknowledge a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you detect a reversing gear noise that lasts on your Fiat Panda? Any gearbox problem can be severe, but before making sure, it is better to do a few inspections. Our team has created this document to support you solve it. First, we will see what the sources and the different gearbox noises can be on Fiat Panda, and second, what are the solutions available to you.
Classical reverse Fiat Panda noises and some tips to protect your gearbox
Why does the reversing of my Fiat Panda make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise generated by the reversing of your Fiat Panda is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will exert on the gears will be monumental and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you hear a reverse noise on your Fiat Panda if you shift gear under these conditions.
Diverse Fiat Panda reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to learn about the origin of reversing noise on Fiat Panda. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Fiat Panda, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this paper for more info about strut mount noises on Fiat Panda.
An increased reverse knocking noise on Fiat PandaX
If you are subject to a knocking noise when you are in reverse with your Fiat Panda and this noise tends to increase as you gain speed. It is plausible that you are dealing with a serious problem that needs to be solved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your vehicle to your mechanic quickly or browse this content about gearbox noise on Fiat Panda for more data.
I discover a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Fiat Panda reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
